When it comes to
building coils, Geo Coils has a wide range of coils for almost all heat
transfer applicaitons. The entre range of 9.52, 12.7, 15.88mm coils are
manufactured at our fully equipped factory at Jebel Ali.
Chilled Water Coils
Hot Water Coils
Dx Coils
Condenser Coils
Evaporator Coils
Steam Coils
Product Specification
Coils with minimum range of 1Rx6 holes x8” Fin
Length to Maximum range of 24 rows x 60 holes x 8000mm Fin Length.
Coils with aluminium fins, copper fins.
TUBE O.D.
(mm)
Tube Type
Fine Type (mm)
Fin Surface
Fin Edge
FPI Range
Row
9.52
Inner
Grooved / Plain
25.4 x 18.24
Louvered
/ Plain / Sine Wave
Ripple
Edge / Plain
6 to 20
1 to 24
9.52
Inner
Grooved / Plain
25.9 x 22
Louvered
/ Plain / Sine Wave
Ripple
Edge / Plain
6 to 20
1 to 24
12.7
Inner
Grooved / Plain
31.75 x 27.5
Louvered
/ Plain / Sine Wave
Ripple
Edge / Plain
6 to 20
1 to 18
15.88
Plain
38.1 x 33
Plain
/ Sine Wave
Ripple Edge
6 to 18
1 to 15
Quality Engineers
examine coil components, tubes and fins as each coil is assembled. In-house
inspectors review the coils at key stages and check that all special
instructions are followed. Once the coil is fully assembled, it undergoes a
final inspection. Each coil is leak-tested and filled with Nitrgoen to avert
any leakage in the coil.